FSC-BT1058 QCC5181 BT 5.3 LE Audio Module for Master & Slave
FSC-BT1058 is a cutting-edge dual-mode Bluetooth 5.3 transceiver module that leverages the advanced Qualcomm QCC5181 chipset, supports receiving and transmitting both Blutooth LE audio and Classic audio, offers comprehensive features such as LC3 codec, multi-stream, Auracast broadcast audio, hearing aid support, hybrid active noise reduction, cVc, aptX, aptX-HD and aptX-Adaptive. Preloaded with Feasycom firmware, it’s very powerful and easy-to-use.
Download
- Qualified to Bluetooth® v5.3 specification
- Dual 240 MHz Qualcomm® Kalimba™ audio DSPs
- 32/80 MHz Developer Processor for applications
- Firmware Processor for system
- High-performance 24-bit stereo audio interface
- Digital and analog microphone interfaces
- Flexible LED controller and LED pins with PWM support
- Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0
- Advanced audio algorithms
- Active Noise Cancellation: Hybrid, Feedforward, and Feedback modes, using Digital or Analog Mics, enabled using license keys available from Qualcomm®
- Qualcomm® LE Audio, aptX™ and aptX™ HD Audio, LDAC
- aptX™ Adaptive, enabled using license key
- Qualcomm® cVc™ Noise Cancellation Technology, enabled using license key
- Integrated PMU: Dual SMPS for system/digital circuits, Integrated Li-ion battery charger
- Qualified to Bluetooth v5.3 specification including 2 Mbps Bluetooth Low Energy and Bluetooth Low Energy Isochronous Channels
- Qualcomm® Bluetooth High Speed Link
- Single ended antenna connection with on-chip balun and Tx/Rx switch
- Bluetooth, Bluetooth Low Energy, and mixed topologies supported
- Class 1 support
| Categories | Features | Implementation |
|---|---|---|
| Wireless Specification | Chip | QCC5181 |
| Bluetooth Version | V5.3 | |
| Frequency | 2.402 ~ 2.480 GHz | |
| Transmit Power | +15 dBm (Typ VBAT=3.7V) | |
| Receive Sensitivity | -96.5 dBm (typ.) π/4 DQPSK receiver sensitivity -90.0 dBm (typ.) 8DPSK receiver sensitivity -100.5 dBm (typ.) BLE 1 Ms/s receiver sensitivity |
|
| Real-time digitised RSSI available to application | ||
| Raw Data Rates (Air) | 3 Mbps (Classic BT - BR/EDR) | |
| Host Interface and Peripherals | UART Interface | TX, RX, CTS, RTS |
| General Purpose I/O | ||
| Default 115200, N, 8, 1 | ||
| Baudrate supporting from 2400 to 4000000 | ||
| GPIO | 20 (maximum – configurable) lines | |
| O/P drive strength (2, 4, 8, or 12 mA) | ||
| Pull-up resistor (70 KΩ) control | ||
| I²C Interface | I²C Master interface with speed up to 400 kbps | |
| SPI Interface | SPI debug and programming interface with read access disable locking | |
| ADC Interface | Analog input voltage range: 0 ~ 1.854V | |
| 10-bit ADC | ||
| 4 channels (configured from AIO total) | ||
| USB Interface | 1 USB2.0 Full Speed (12 Mb/s) | |
| Audio CODEC | LE Audio, aptX, aptX HD, aptX Adaptive (enabled using license key), SBC and AAC audio codecs | |
| Configurable Signal Detection to trigger events | ||
| Compander to compress or expand the dynamic range of the audio | ||
| Post Mastering to improve DAC fidelity | ||
| 24‑bit I²S interface with 1 input and 3 output channels, Supports 8-slot TDM, Supports 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz, 384 kHz sample rates | ||
| SPDIF interfaces ：Two instances configurable as input or output, Supports 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz sample rates | ||
| 2 coder decoder (codec) output channels, supporting 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz sample rates, 16 codec input channels supporting 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz sample rates | ||
| Digital mic: Five interfaces supporting up to ten microphones, Supports 500 kHz, 571 kHz, 666 kHz, 800 kHz, 1 MHz, 1.33 MHz, 2 MHz, and 4 MHz clock frequencies | ||
| Stereo audio ADC with line input, stereo audio DAC | ||
| Supported sample rates of 8, 16, 32, 44.1, 48, 96, 192 and 384KHz (Input) | ||
| MIC/Line_IN SNR: 99 dB | ||
| MIC/Line_IN THD+N: -94.9 dB | ||
| Audio Output SNR: 103.8 dBA typ | ||
| Audio Output THD+N: -92.5 dB typ | ||
| Audio Output Power: 1000 mV (typ) (0 dBFS 10K load) | ||
| Profiles | BR/EDR | SPP (Serial Port Profile) - Up to 600 Kbps |
| A2DP/AVRCP/HFP/HSP/HOGP/PBAP/SPP Profiles support | ||
| Bluetooth Low Energy | GATT Client & Peripheral | |
| Simultaneous BR/EDR and BLE support | ||
| Maximum Connections | BR/EDR | up to 7 active slaves |
| Bluetooth Low Energy | 1 connection as peripheral, up to 5 connections as central | |
| FW upgrade | Via UART (TBD) | |
| USB (TBD) | ||
| OTA | ||
| SPI | ||
| Supply Voltage | Supply | VDD_IO: 1.7V ~ 3.3V; VBAT_IN: 2.8V ~ 4.30V |
| Power Consumption (Load=10KΩ, VBAT_IN=3.3V) | Play: < 5mA (0dB 1KHz sine wave signal)---*Average | |
| Pairing: < 5mA---*Average | ||
| OFF: < 100uA---*Average | ||
| Physical | Dimensions (mm) | 13 × 26.9 × 2.2; Pad Pitch 1.0 |
| Environmental | Operating | -40°C to +85°C |
| Storage | -40°C to +85°C | |
| Miscellaneous | Lead Free | Lead-free and RoHS compliant |
| Warranty | One Year | |
| Humidity | 10% ~ 90% non-condensing | |
| MSL grade: | MSL 3 | |
| ESD grade: | Human Body Model: Class 2 2kV (all pins) | |
| Charged Device Model: Class III 500V (all pins) |
Media Device