FSC-BW104 QCA6574A Wi-Fi 5 + BT 5.0 Module
FSC-BW104 module, using the QCA6574A IC, is a single-die WLAN and Bluetooth combo solution supporting 2×2 MIMO with two spatial streams for IEEE 802.11 a/b/g/n/ac WLAN standards and Bluetooth 5.0. It enables seamless integration of WLAN/BT and Low Energy technology. The module features advanced collaborative coexistence hardware mechanisms and algorithms, optimizing WLAN and Bluetooth collaboration for maximum performance and enhanced quality in simultaneous voice, video, and data transmission. The FSC-BW104 is ideal for designers seeking to add wireless capability to their products, offering high design flexibility, a short development cycle, and quick time-to-market.
Download
- Highly integrated wireless local area network (WLAN) system-on-chip (SoC) for 5GHz 802.11ac, or 2.4GHz/5GHz 802.11n WLAN applications
- Supports BT 5.0, ANT+ and is backward-compatible with previous BT versions from v1.2
- Maximal Likelihood (ML) decoding, Low-Density Parity Check (LDPC), Rx Space Time Block Code (STBC)
- Supports 20/40MHz at 2.4GHz and supports 20/40/80MHz at 5GHz
- Supports BT-WLAN coexistence and ISM-LTE coexistence
- Support BT for class 1 and class 2 power-level transmissions without requiring an external PA (power amplifier)
- Enhanced qualification based on selective AEC Q100 and JEDEC test cases
- Single-stream spatial multiplexing up to 433.3 Mbps data rate. (Under dual-antenna status, 802.11ac: Up to 867 Mbps)
- Low power SDIO 3.0 / SDIO 2.0 interface for WLAN and UART/PCM interface for BT
- UART (Max Baud Rate 3.2 Mbps)
- Stamp module suitable for Surface Mounted Technology (SMT)
- Iron Shielding case
- Stamp-53 package
- Dimensions (Iron Shielding Case): 23.4mm (L) × 19.4mm (W) × 2.6mm(H)
- Operating Voltage:
- VBAT: 3.14V ~ 3.46V
- VIO: 1.71V ~ 3.46V
- RoHS / REACH Compliant
- External Antenna
- Support GATT, HID, DUN, FTP, ANCS
- Support HFP, A2DP, AVRCP, PBAP, SPP, IAP2
- Support Android / Linux
| Categories | Features | Implementation |
|---|---|---|
| Bluetooth | ||
| Bluetooth Standard | Bluetooth V5.0+EDR | |
| Frequency Band | 2.402 ~ 2.480 GHz | |
| Bluetooth Class | Class 1，Class 2 | |
| Range, line of sight | Up to 10m | |
| Transmit Power | +9dBm (Max.) | |
| Receive Sensitivity | -89 dBm (Min.) | |
| Support Mode | Slave and Master | |
| Profiles | HFP, A2DP, AVRCP, SPP, PBAP, HID, DUN, FTP, GATT, IAP2, ANCS | |
| Maximum Throughput | 3 Mbps | |
| Interfaces | UART, PCM | |
| Wi-Fi | ||
| Wi-Fi Standard | 2.4G: IEEE 802.11 b/g/n radio 5G: IEEE 802.11 a/n/ac radio |
|
| Range, line of sight | Up to 100m | |
| Frequency Band | 2.4GHz and 5GHz frequency band | |
| Transmit Power | +17 dBm (Max.) +10 dBm (Min.) |
|
| Receive Sensitivity | -80 dBm @ 11 Mbps -71 dBm @ 54 Mbps -70 dBm @ HT20 MCS7 -70 dBm @ HT40 MCS7 -60 dBm @ VHT80 MCS9 |
|
| Profiles | WIFI-AP(access point), WIFI-Station | |
| Maximum Throughput | 802.11b: Up to 11 Mbps 802.11g: Up to 54 Mbps 802.11n: Up to 300 Mbps 802.11ac: Up to 867 Mbps (Under dual-antenna status) |
|
| Security | WEP, TKIP, AES, WPA, WPA2 | |
| Interface | SDIO | |
| General | ||
| Dimensions (mm) | 23.4 × 19.4 × 2.6 | |
| Hardware Interfaces | UART, GPIO, SDIO, PCM/I²S | |
| Antenna | External (Dual-band antenna, supporting 2.4GHz and 5.8GHz frequencies) |
|
| Operating Temperature | -40°C ~ +85°C | |
| Storage Temperature | -40°C ~ +85°C | |
| Operating Voltage (VBAT) | 3.3V (Typ.) | |
| VIO | 1.8V ~ 3.3V (Typ.) | |
| Miscellaneous | Lead Free | Lead-free and RoHS compliant |
| Warranty | One Year | |
| Humidity | 10% ~ 90% non-condensing | |
| MSL Grade | MSL 3 | |
| ESD Grade | Human Body Model: Pass ±2000V, all pins Charge device model: Pass ±250V, all pins |
|
Car AV System
Measurement & Monitoring
Media Device